PUBLICATIONS

International Journals

  1. Vipindas, K. and Mathew, J., 2019, “Wear Behavior of TiAlN Coated WC Tool during Micro End Milling of Ti-6Al-4V and Analysis of Surface Roughness,” Wear, DOI:10.1016/j.wear.2019.02.018
  2. Dilip, D. G., Ananthan, S. P. Panda, S., Mathew J., 2019, “Numerical Simulation of the Influence of Fluid Motion in Mushy Zone during Micro EDM on the Crater Surface Profile of Inconel 718 Alloy,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, DOI: 10.1007/s40430-019-1595-0
  3. Vipindas, K., and Mathew, J., 2018, “Modeling of burr thickness in micro-end milling of Ti6Al4V,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, DOI: 10.1177/0954405418769916
  4. Vipindas, K., Anand, K. N., Mathew, J., 2018, “Effect of cutting edge radius on micro end milling: force analysis, surface roughness, and chip formation,” International Journal of Advanced Manufacturing Technology, DOI:10.1007/s00170-018-1877-1
  5. Rhinithaa, P.T., Selvakumar, P., Nikhil, S., Vysyaraju, A., Deepak, L. K., Mathew, J., 2018, “Comparative study of roundness evaluation algorithms for coordinate measurement and form data,” PrecisionEngineering, Vol. 51, pp. 458–467
  6. Vipindas, K., Kuriachen, B., and Mathew, J., 2016, “Investigations into the Effect of Process Parameters on Surface Roughness and Burr FormationDuring Micro End Milling of Ti-6Al-4V,” International Journal of AdvancedManufacturing Technology, DOI:10.1007/s00170-016-9210-3.
  7. Kuriachen, B., and Mathew, J., 2016, “Spark Radius Modeling of Resistance-Capacitance Pulse Discharge in Micro-Electric Discharge Machining of Ti-6Al-4V: An Experimental Study” International Journal of Advanced Manufacturing Technology, Vol.85, Issue 9,pp. 1983–1993.
  8. Kuriachen, B., and Mathew.J., 2016, “Effect of Powder Mixed Dielectric on Material Removal andSurface Modification in Micro Electric Discharge Machining of Ti-6Al-4V” Materials And Manufacturing Processes., Vol. 31, Issue 4, pp. 439-446.
  9. Kuriachen, B., Alwin Varghese, Somashekar, K.P., Panda, S., and Mathew, J.,2015, “3DNumerical Simulation of Micro Electric Discharge machining of Ti-6Al-4V,” Int. J. Adv. Manuf. Technol., Vol. 79, Issue 1,  pp. 147-160.
  10. Kuriachen, B., and  Mathew, J.,2015, “Experimental Investigations into the Effects of MicroElectric-DischargeMilling Process Parameters on Processing Ti-6Al-4V,” Materials AndManufacturing Processes., Vol. 30, Issue 8, pp. 983-990.
  11. Kuriachen, B., Somashekhar, K. P., and Mathew, J., 2015, “Multiresponse optimization of micro-wire electrical discharge machining process,”  Int. J. Adv. Manuf.Technol., Vol. 76, Issue 1-4, pp. 91-104.
  12. Somashekhar, K. P., Panda, S., Mathew, J., and Ramachandran, N.,2015, “Numerical simulation of micro-EDM model with multi-spark,”  Int. J. Adv. Manuf. Technol., Vol. 76, Issue 1-4, pp.83-90.
  13. Kuriachen, B., and Mathew, J., 2014, “Numerical Simulation Of Single Resistance- Capacitance PulseDischarge In Micro Electric Discharge Machining Of Ti-6Al-4V,” Int J of PrecTech., Vol. 4, pp. 176 – 191.
  14. Kuriachen, B., and Mathew, J., “Modeling of material removal mechanism in Micro Electrical Discharge Milling of Ti-6Al-4V” 2014, Applied Mechanics and Materials., Vol. 592-594, pp. 516-520.
  15. Jayakumar, K., Mathew, J., Joseph, M. A., Suresh Kumar, R., Shukla, A. K., and Samuel, M.G., 2013, “Synthesis and Characterization of A356-SiCp Composite Produced through Vacuum Hot Pressing” Mater. Manuf. Processes, Vol 28, No 9, pp 991-998.
  16. Jayakumar, K., Mathew, J., and Joseph, M.A.,2013, “An investigation of cutting force and tool–work interface temperature in milling of Al–SiCp metal matrix composite,” Proc. IMechE Part B: J. Engg.Manuf., Vol. 227(3), pp. 362–374.
  17. Jayakumar, K., Mathew, J., and Joseph, M.A.,2012, “Effect of Process Parameters on Surface Roughness and Cutting Force During End Milling of Al A356-SiCpMetal Matrix Composites,” Int. J. Mater. Sci. Technol., Vol.6, pp.11-24.
  18. Jayakumar,K., Mathew, J., Joseph, M.A., SureshKumar, R., and Chakravarthy, P., 2012,“ Processing and end milling behavioural study of A356-SiCp Composite,” Mater.Sci. Forum., Vol. 710, pp. 338-343.
  19. Somashekhar, K. P., Mathew, J., and Ramachandran, N., 2012, “A feasibility approach by simulated annealing on optimization of micro-wire electric discharge machining parameters,” Int. J. Adv. Manuf.Technol., Vol. 61, pp.1209-121.
  20. Jayakumar, K., Mathew, J., and Joseph, M. A.,2012, “Analysis and Prediction of End Milling Characteristics of Al-SiCp MetalMatrix Composite Using RSM and ANN.,” J. Manuf. Sci. Prod., Vol.12, pp. 105–110.
  21. Somashekhar, K. P., Mathew, J., and Ramachandran, N., 2012, “Electro thermal theory approach for numerical approximation of theμ-EDM process,” Int. J. Adv. Manuf. Technol., Vol. 61 pp.1241-1246.
  22. Sooraj, V. S., and Mathew, J.,2011, “An experimental Investigation on the machining character tics of microscale end milling”, Int. J. of Adv. Manuf. Technol., pp. 56951-58.
  23. Somashekhar, K. P., Mathew, J., and Ramachandran, N.,2011, “Multiobjective optimization of micro-WEDM parameters usingGrey Relational Analysis with  Taguchi method,”  Proceedings of Institution of Mechanical  Engineers, Part C. J. of Mechanical Eng. Sci., Vol. 225 no. 7 1742-1753.
  24. Patil, M. S., Mathew, J.,  Rajendrakumar, P. K., and Karade, S., 2010, “Experimental Studies Using Response Surface Methodology for Condition Monitoring of Ball Bearings,” Transactions of the ASME, J. of Tribology., Vol.132,pp.044505:1-5.
  25. Patil, M. S., Mathew, J., Rajendrakumar, P. K., and Desai, S., 2010, “A Theoretical Model to predict the effect of localized effect on vibrations associated with ball bearing,” Int. J.of Mechanical Sciences., Vol. 52, Issue 9, pp. 1193-1201.
  26. Somashekar, K. P., Ramachandran, N., and Mathew, J., 2010, “Material removal characteristics of micro slot (kerf)geometry in m-WEDM on aluminium,” Int. J. Of Adv. Manuf. Technol., Vol 51, pp.611-626.
  27. Somashekar, K. P., Ramachandran, N., and Mathew, J., 2010, “Optimization of Material Removal Rate in Micro-EDMUsing Artificial Neural Network and Genetic Algorithms,” Materials and Manuf.  Process., Vol 25, pp. 467-475.
  28. Somashekar, K.P.,  Ramachandran, N., and Mathew, J., 2010, “Effect of MachiningConditions on the Performance Characteristics of Micro Wire Electric Discharge Machining of Stainless Steel,” Int. J. of Mechanical Eng., Vol 3. No.1,pp.7-13.
  29. Somashekhar, K.P., Ramachandran, N., and Mathew, J., 2010, “IN-SITU: A Novel approach for the production of microholes”, Int. J. of Adv  Materials Research., Vols.126-128, pp. 885-890.
  30. Somashekar, K. P., Ramachandran, N., and Mathew, J., 2009, “Modeling and optimization of process parameters in micro wire EDM by Genetic Algorithm,” Adv Materials Research., Vols. 76-78, pp. 566-570.
  31. Mathew, J., Somashekar, K. P., Sooraj, V. S., Subbarao, N., and Ramachandran, N., 2009, “Effect of work material and machining conditions on the accuracy and quality of micro holes,” Int. J. of AbrasiveTechnol., Vol.2(3), pp. 279-298.
  32. Patil,M. S., Mathew, J., Rajendrakumar, P. K., and Desai, S., 2009, “ANOVA and KS Test of Wavelet Coefficients for Condition Monitoring of Ball Bearings,” J. of Wavelet Theory and Applications (JWTA), Vol.3(1), pp. 169-185.
  33. Somashekhar, K.P., Ramachandran, N., and Mathew, J., 2010,“ Effect of Machining  Conditions on the Performance   Characteristics of Micro Wire  Electric Discharge Machining of  Stainless  Steel,“ Int. J. of Mechanical  Eng., Vol.3(1), pp. 7-13.
  34. Patil, M. S., Mathew, J., Rajendrakumar, P. K., and Desai, S., 2009, “An Analytical model to predict the effect of localized defects on vibrations associated with ball bearing,” Int.J. of Eng. Systems Modeling & Simulation., Vol.1-4, pp. 242-252.
  35. Patil, M. S., Mathew, J., Rajendrakumar, P. K., and Desai, S., 2009, ”Wavelet de-noising using customized thresholding for bearing fault detection,” J. of Manuf. Eng., Vol.4(4),pp.257-263.
  36. Patil, M. S., Mathew, J. and Rajendrakumar, P. K., 2008, “Bearing Signature Analysis as a Medium forFault Detection: A Review,” J. of Tribology., Vol.130, pp.014001-1 to7.
  37. Saresh, N., Gopalakrishna Pillai, M., Mathew, J., 2007, “Investigations into the effects of electron beam welding on thick  Ti-6Al-4V Titanium Alloy,” J. of MaterialsProcessing Technol., Vol.192-193, pp.83-88.
  38. Dhanish, P. B., Mathew, J.,2007, “A Fast and Simple Algorithm for Evaluation of Minimum ZoneStraightness Error from Coordinate Data”, Int. J. for Adv. Manuf.Technol., Vol. 32, pp. 92-98.
  39. Dhanish, P. B., Mathew, J.,2006, “Effect of CMM Point Coordinate Uncertainty on UncertaintiesinDetermination of Circular  Features, ” Measurement, Vol.39,  pp. 522-531.
  40. Mathew, J., Ramakrishnan, N., Naik, N. K.,1999, “Trepanning on Unidirectional Composites: Delamination Studies,” CompositesPart A: Applied Sci. and Manuf., Vol. 30(8), pp.951-959.
  41. Mathew, J., Goswami, G. L., Ramakrishnan, N., Naik, N. K., 1999, “Parametric Studies on Pulsed Nd:YAG Laser Cutting of CarbonFibre Reinforced Composites,” J. of Materials Processing Technol., Vol.89-90, pp.198-203.
  42. Mathew, J., Ramakrishnan, N., Naik. N. K.,1999, ”Investigations into the Effect of Geometry of a Trepanning Tool on Thrust and Torque During Drilling of GFRP Composites,” J. of Materials Processing Technol., Vol.91 (1-3), pp.1-11.
  43. Chaudhury, S. K., Mathew, J.,1995, “Investigations of the Effect of Non-Uniform Insert Pitch on Vibration During Face Milling,” Int. J. of Machine Tools and Manufacture, Vol. 35, No. 10, pp. 1435-1444.

National Journals and Conferences

  1. P.B. Dhanish, Jose Mathew, “On The Distribution Of Circularity Error In Rough Turning, FourthNational  Conference on Precision Engineering – COPEN 2005″, Jadavpur University, Kolkata, 16-17 Dec 2005, pp. 453-457, Allied Publishers, NewDelhi, (2005).
  2. Jose Mathew, N. Ramakrishnan, N.K. Naik, “Hole Making on GFRP Composites with Trepanning Tools: Cutting Mechanisms and Hole Quality”, Presented at 17th AIMTDR Conference, Warangal, India,(1997).
  3. Swathi Ghosh, Jose Mathew, P.C. Bhatt, N. Ramakrishnan, N.K. Naik, G.L. Goswami Parametric Studies onCutting of AFRP Composites Using Nd:YAG Laser, Laser Applications in MaterialScience and Industry, Kesavamoorthy, R., BabuRao, C., Arora, A.,Kalyanasundaram, P. (eds.), Proceedings of Laser Applications in MaterialScience and Industry, Chennai, India, February, pp. 187-192, (1997).
  4. Jose Mathew, N. Ramakrishnan, N.K. Naik, “Drilling of UD Composites with Trepanning Tools: Preliminary Investigations”, Advances in Testing, Design and Development of Aerospace Structures, Mujumdar, P. M. and Joshi, A. (eds.), Proceedings of the Fifth National Seminar on Aerospace Structures, Bombay, India, January 18-19, pp. 247-252, (1996).
  5. M.S.Patil, Jose Mathew, P.K. Rajendrakumar, “Study on wavelet-based thresholding for noise reduction to detect bearing defect,” National Journal of TECHNOLOGY, 4(3), pp.1-6, 2008. (ISSN 0973-1334)
  6. M.S.Patil, Jose Mathew, P.K.Rajendrakumar, “Wavelet de-noising using customized thresholding forbearing fault detection,” Journal of Manufacturing Engineering, 4(4),pp.257-263, 2009. ( ISSN 0973-6867)

International Conferences

  1. Dilip, D. G., Nithinraj, M., Panda, S., and Mathew,J., 2017, “Effect of SiC Particles in Dielectric on Geometrical and SurfaceCharacteristics during Micro-EDM Drilling,” Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-10, 2017), IIT Madras,Dec 6-9., pp. 239 – 242
  2. Ananthan, S. P., Dilip, D. G., Panda, S., and Mathew,J., 2017, “Numerical Simulation and Experimental Investigation of the Crater Surface Profiles Formed During Micro EDM on Inconel 718,” Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering(COPEN-10, 2017), IIT Madras, Dec 6-9., pp. 243-246
  3. Anand, K. N., Ankit, A., Somashekar, K. P., Mathew, J.,2017, “Finite Element Modeling and Experimental Investigation of Micro Endmilling Forces on Aerospace Alloy,” Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering(COPEN-10, 2017), IIT Madras, Dec 6-9., pp. 305-308
  4. Rahul Y, K., Vipindas, K., and Mathew, J., 2017, “Tool Wear Modeling Through Shape Mapping Method In Micro End Milling Process,” Proceedings of 10th InternationalConference on Precision, Meso, Micro and Nano Engineering (COPEN-10, 2017), IITMadras, Dec 6-9., pp. 309-312
  5. Vipindas, K., Bhanupratap, G., and Mathew, J.,2017, “ Investigation On Tool Wear During Micro End Milling Of Ti-6Al-4V,” Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-10, 2017), IIT Madras, Dec 6-9., pp. 313-316
  6. Bhanupratap, G., Vipindas, K., and  Mathew, J., 2017, “Modeling Of Temperature Distribution DuringMicro End Milling Of Ti-6Al-4V Alloy,” Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering(COPEN-10, 2017), IIT Madras, Dec 6-9., pp. 317-320
  7. Elias, J. V., Asams, S., and Mathew, J., 2017, “Experimental Investigation of the Tool Wear Mechanism during Micro Turning on Ti-6Al-4V Alloy,” Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-10,2017), IIT Madras, Dec 6-9., pp. 321-324
  8. Anand, K. N., Ankit, A., Mathew, J., 2017,“Modeling and Experimental Investigation of Material Microstructure Effects on Cutting Force and Surface Roughness during Micro End milling on Inconel 718,” Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-10, 2017), IIT Madras,Dec 6-9., pp. 345-349
  9. Arun V., JeesG., Manu R., and Mathew, J., 2017,“Design and Fabrication of Wire Electrical Discharge Turning Setup and Study of Surface Roughness of WEDT Products,” Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering(COPEN-10, 2017), IIT Madras, Dec 6-9., pp. 563-566
  10. Jees G., Arun V., Manu R., and Mathew, J., 2017, “Investigation of Areal Surface Roughness duringWire Electric Discharge Turning (WEDT) of Inconel 825”, Proceedings of 10th International Conference on Precision, Meso, Micro and Nano Engineering (COPEN-10, 2017), IIT Madras, Dec 6-9., pp. 667-670
  11. Rhinithaa, P. T., Selvakumar, P., Nikhil, S.,Vysyaraju, A., Lawrence, D., and Mathew,J., 2017, “Comparison of Least Square Fitting Algorithms for the Evaluation of Roundness Error,” Proceedings of 10thInternational Conference on Precision, Meso, Micro and Nano Engineering(COPEN-10, 2017), IIT Madras, Dec 6-9., pp. 937-940
  12. Dilip, D. G., John, G., Panda, S., and Mathew, J,” Numerical Modeling Of Micro-EDM Process Using Finite Volume Method,”  AIMTDR, 2016, pp. 1556-1560
  13. Dilip, D. G., Subrahmanyam, A., Panda, S., and Mathew, J., 2016, ” Experimental Investigations on HAZ and Recast Layer in WEDM onInconel 718,” AIMTDR, 2016, pp. 458-462
  14. Nitinraj, M., Dilip, D. G., Panda, S., and Mathew, J., 2016, ” ExperimentalStudies on Effect of Powder Mixed Dielectric on Surface Quality in Wire EDM,” AIMTDR,2016, pp. 463-467
  15. Vipindas, K., Anand, K, N., and Mathew, J., 2016, “Effects of Tool Wear on Surface Roughness, BurrFormation and Cutting Force during Micro End Milling on Ti-6Al-4V,” AIMTDR, 2016, pp. 1569-1574
  16. Vipindas, K., Anchana, P., and Mathew, J., “Modeling and Experimental Study of Burr Formation during Micro End Milling on Ti-6Al-4V,” AIMTDR,2016, pp. 1575-1579
  17. Vipindas, K., Anand, K, N., Anchana, P., and Mathew, J., “Modeling and Experimental Investigations of Temperature Distribution During Micro End Milling of TitaniumAlloy,” AIMTDR, 2016, pp.1565-1568
  18. Awad Dhondiba, Kuriachen B, Jose Mathew., “Modeling and Experimental Investigation of LowFrequency Work piece Vibration-Assisted Micro Electric Discharge Milling onTitanium Alloy”, COPEN 9, 2015.
  19. Deepak G Dilip, George John, Satyananda Panda, Jose Mathew, “Numerical Modeling and Multi-Objective Optimization of Process Parameters in Micro-EDM Drilling onInconel-718”, COPEN 9, 2015.
  20. Kuriachen B., Somashekhar K.P., Jose Mathew, “A feasibility study to optimize micro electric discharge drilling of Inconel 718 using Ant Colony Optimization”, COPEN 9,2015.
  21. Patil Deepak, Kuriachen B., Jose Mathew, “Modeling of Thermal Residual Stress duringMicro-Electrodischarge Machining of Titanium Alloy”, COPEN 9, 2015.
  22. Subrahmanyam A, Nithinraj M., Deepak G Dilip, Jose Mathew, “Electro-ThermalModeling of Temperature Distribution in Tool Electrode during Micro EDM”, COPEN 9, 2015.
  23. Vipindas K., Anchana P., Anand Krishnan N., Jose Mathew, “Characterization of Chip Geometry and Surface Roughness During Micro End Milling on Ti-6Al-4V”, COPEN 9, 2015.
  24. Vipindas K., Anand Krishnan N., K. Jayakumar, Jose Mathew, “Modeling and Experimental Investigation of Cutting Forces During Micro End Milling onTitanium Alloy”, COPEN 9, 2015.
  25. Alwin Varghese, Kuriachen B., Satyananda Panda, J. Mathew., “Experiments and Simulation of Three Dimensional Micro EDM with Single and Multiple Discharges,”., AIMTDR,2014., vol 1, 327:1-6.
  26. B. Kuriachen, Patil Deepak, Jose Mathew., “Thermal Stress Modeling ofMicro-ElectrodischargeMachining on Titanium Alloy,” ICMMCS, IIT Madras., 2014
  27. Mithun S. Nair, Kuriachen B., R. Vijayakumar, J. Mathew., “Modelling Of MicroElectric Discharge Machining Using FEM,” AIMTDR, 2014., vol 1, 333:1-6.
  28. Dinesh Babu P., Deepak G Dilip, Somashekhar K. P., Allesu K., J. Mathew., “NumericalModeling and Multi-Objective Optimization of Micro-Wire EDM Process” AIMTDR,2014., vol 1,332:1-6.
  29. Vipin, V., Kuriachen B., Manu. R., J. Mathew., “Experimental and FiniteElement Based Investigations on Powder Mixed Micro-Electrical DischargeMachining Of Ti-6Al-4V Alloy” AIMTDR, 2014., vol1,334:1-6.
  30. Vignesh S. Naidu., Vipin Das K ., R. Manu and J. Mathew., “Experimental Study on Varying Electromagnetic Field Assisted Die Sinking EDM” AIMTDR, 2014., vol1, 339:1-6.
  31. Kuriachen B., J.Mathew., “Spark Radius Modelling Of Micro Electric Discharge Machining OfTi-6Al-4V” AIMTDR, 2014., vol 1, 342:1-6.
  32. K.Jayakumar, Jose Mathew, M. A. Joseph., “Synthesis and machinability studies of A356alloy-15% SiC composite” AIMTDR, 2014., vol 1,550:1-6.
  33. H.Sooraj, J. Mathew., “Multi-Objective Optimization of Cutting Parameters in Micro-milling of Ti-6Al-4V Alloy” AIMTDR, 2014., vol 1, 132:1-6.
  34. Kuriachen B., J.Mathew., “Modeling And Multi-Response Prediction Of Micro Edm Drilling OnInconel 718” AIMTDR, 2014., vol 1,341:1-6
  35. Syamlal T., Kuriachen B., Jayadas N.H., Sajesh M., Mathew J., “Parametric Optimization andStatistical Study of Wire Electrical Discharge.”, International MechanicalEngineering Congress(IMEC), June 2014, vol. 1, pp. 233-237
  36. Basil Kuriachen, Mithun S Nair, Jose Mathew, “Numerical simulation of micro electric discharge machining on Ti-6Al-4V.”,  CAE, Dec.2013, vol. 1, pp.1-6
  37. Kuriachen B., and Mathew J., “Effect of Material Properties on Machinability in Micro EDM Milling”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2013, vol. 1, pp. 246-250.
  38. Dinesh S. and MathewJ., “Modeling of Burr width in Micro End Milling through Response Surface Method”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2013,  vol. 1, pp. 90-95
  39. H.Sooraj, Kuriachen B. and Mathew J., “Experimental Investigation on Micro-Milling of Ti-6Al-4V Alloy”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2013, vol. 1, pp. 144-148.
  40. Jithin S., Kuriachen B. and Mathew J., “Multi-objective Optimization of Micro ED Milling of Ti-6Al-4V using Genetic Algorithm (GA)”, Proceedings of InternationalConference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec.2013,  vol. 1, pp. 157-163
  41. Jithin S., Kuriachen B. and Mathew J., “Optimization of Micro Electrical Discharge MillingParameters using Particle Swarm Optimization (PSO)” Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering(COPEN), Dec. 2013,  vol. 1, pp. 164-169.
  42. Suvin P.S., Kuriachen B., Manu R. and Mathew J., “Multi-objective Optimization and Analysis of Taper Cutting by Silicon Carbide (SiC) AbrasivePowder Mixed Micro Wire EDM”, Proceedings of International Conference onPrecision, Meso, Micro and Nano Engineering (COPEN), Dec. 2013,  vol. 1, pp. 170-175
  43. Vipin V., Kuriachen B., Manu R. and Mathew J., “Experimental Investigation of Powder Mixed Micro Electrical Discharge Milling of Ti-6Al-4V”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering(COPEN), Dec. 2013,  vol. 1, pp. 228-233.
  44. Vignesh S. Naidu, Kuriachen B., Manu R. and Mathew J., “A Hybrid MachiningTechnique in μ-EDM: A Combination of Low Frequency Vibration and Magnetic FieldAssisted Setup to MachineStainless Steel Workpiece”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering(COPEN), Dec. 2013,  vol. 1, pp. 234-239.
  45. Dinesh Babu P., Kuriachen B., Allesu K. and Mathew J., “Experimental Investigation and Optimization of Process Parameters in Machining Inconel-718 usingMicro-WEDM”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2013, vol. 1, pp. 240-245.
  46. Deepak G. Dilip, Basil Kuriachen and Jose Mathew, “Finite Element Analysis of Temperature Distribution on Various Workpiece Materials Machined usingμ-EDM”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2013, vol. 1, pp. 251-256.
  47. Jayakumar K., MathewJ. and Joseph M.A., “Ball Nose End Milling Studies on A356/10% SiCpComposite”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2013, vol. 1, pp. 423-430.
  48. Navaneeth M.S., Kuriachen B., Sreenath A.M. and Mathew J., “Finite Element Modeling ofMicro Cutting by Non Linear Analysis”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2013,  vol. 2, pp. 564-568.
  49. Tom Josin, G. Jithin, Jose Jyothish, Kumar Sanjay and Mathew Jose, “Design, Modeling, Analysis and Manufacturing of an Advanced Centrifugal Pump Impeller”, Proceedings of International Conference on Precision, Meso, Micro and NanoEngineering (COPEN), Dec. 2013, vol. 2, pp. 576-581.
  50. Somashekhar K.P., Shravani S., Mathew J. and Ramachandran N., “Comparative Study on Soft ComputingModeling of Micro WEDM Process”, Proceedings of International Conference onPrecision, Meso, Micro and Nano Engineering (COPEN), Dec. 2013,  vol. 2, pp. 696-701.
  51. Jayakumar K., Mathew J. and Joseph M.A., “Experimental Studies on Surface Finish and Material Removal Rate in End Milling of A356-SiCp Metal Matrix Composites”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering(COPEN), Dec. 2013,  vol. 2, pp. 859-863.
  52. Jithin S., Kuriachen B. and Mathew J., “Modeling of μ-ED Milling of Ti-6Al-4V using RSM and ANN”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2013, vol. 2, pp. 946-950.
  53. Mathew J. Joseph, Kuriachen B. and Mathew J., “ANN Modeling and MultipleObjective Optimization of Process Parameters in Micro-EDM drilling usingTubular Electrodes”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2013,  vol. 2, pp. 951-955.
  54. Mithun S. Nair, Kuriachen B., Vijayakumar R. and Mathew J., “Thermo Physical Modeling ofMicro Electric Discharge Machining using Finite Element Method”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering(COPEN), Dec. 2013,  vol. 2, pp. 993-998.
  55. Varghese A., Kuriachen B., Panda S. and Mathew J., “A Finite Volume Approach for Solving Three Dimensional Micro EDM Model”, Proceedings of InternationalConference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec.2013,  vol. 2, pp. 999-1004.
  56. Jayakumar K., Jose Mathew and Joseph M.A., “Effects of SiC Particles Addition and Heat Treatment on Mechanical Properties of Al-SiCp Composite Made by Vacuum HotPressing”, AIMTDR, Dec. 2012, Vol. 1, pp.199
  57. Deepak G. Dilip, Basil Kuriachen and Jose Mathew, “Multi-objective Optimization of Process Parameters in Vibration Assisted Micro-EDM”, AIMTDR, Dec. 2012, Vol. 1, pp. 1025
  58. Jose Mathew; Allesu K.; ShravaniSrisailam; K. P. Somashekhar;Prakash Naidu P.; P. S. Suvin., “Estimation of residual stress and crater shape in micro EDM by finite element method”, ASME(2012), Proc. ASME. 45196; Vol. 3, Part B: 1043-1046.
  59. Jose Mathew, Deepak G Dilip, Mathew J. Joseph, Basil Kuriachen, “Finite element modeling of discharge zone in micro-EDM process”, ASME(2012), International Mechanical Engineering Congress and Exposition, Vol. 3, Part B, pp. 1047-1052.
  60. Kuriachen Basil, P. Prakash Naidu, Jose Mathew and K. Allesu, “Modeling ofMicro EDM Parameters on Machining of Aerospace Alloy”, AIMTDR, Dec.2012, Vol.1, pp.1050
  61. ShravaniSrisailam, Basil Kuriachen, Eby David and Jose Mathew, “Modeling and Multi ResponseOptimization of µ-WEDM”, AIMTDR, Dec.2012, Vol. 1, pp.1063.
  62. Kuriachen Basil, Dilip G. Deepak, M.S. Navaneeth andJoseMathew, “MRR Optimization ofInconel 718 in Low Frequency Work Piece Vibration  Assisted Micro-EDM using RSM”, AIMTDR, Dec.2012, Vol. 1, pp.1085.
  63. Somashekhar K. P., Panda S., Jose Mathew and Ramachandran N., “Numerical Simulation of Micro-EDMModel with Multi-spark”, AIMTDR, Dec.2012, Vol. 1, pp.1090.
  64. Deepak G. Dilip, Jose Mathew, “Experimental Investigation and Optimization of Process Parameters in Micro Drilling using Vibration AssistedMicro EDM”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2011, pp. 174-177.
  65. JayakumarK., Jose Mathew, M.A. Joseph, “Analysis and Prediction of Milling Characteristics of A/SiCp MMC”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2011, pp. 359-364.
  66. Dinesh Setti, Jose Mathew, “Modeling of Surface Roughness in Micro End Milling through Response Surface Method”, Proceedings of InternationalConference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2011, pp. 459-462.
  67. MathewJ Joseph, Jose Mathew, “Investigation of Quality of Micro-EDMDrilled Holes using Tubular Electrodes”, Proceedings of InternationalConference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2011, pp. 188-191.
  68. ShravaniSrisailam, Jose Mathew, “Experimental Study and Optimization of Machining parameters of Micro-Wire EDM”, Proceedings of International Conference onPrecision, Meso, Micro and Nano Engineering (COPEN), Dec. 2011, pp.184-187.
  69. Mukesh M., Jose Mathew, R. Vijayakumar, P. S. Suvin “MathematicalModeling to Predict the Cutting Force and Thrust Force in Micro TurningProcess”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2011, pp. 66-68.
  70. Viran Kumar, R. Manu, Jose Mathew, “Non-Contact Surface Roughness Measurement of Micro-Turned Components using Image Processing”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering(COPEN), Dec. 2011, pp.98-101.
  71. SomashekarK.P., Prakash P., Jose Mathew, Panda S., “Finite Volume Approximation for micro Electric Discharge Machining processes”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering(COPEN), Dec. 2011, pp. 442-446.
  72. Somashekar, K. P., Jose Mathew and Ramachandran, N., 2010, “Electo ThermalTheory Approach for Numerical Approximation of µ-EDM”, Proceedings of 3rdInternational and 24th All India Manufacturing Technology, Design and Research Conference (AIMTDR), Visakhapatnam, India, December 2010,pp.343-348.
  73. Somashekar, K. P., Jose Mathew and Ramachandran, N., 2010, “A FeasibilityApproach by   Simulated Annealing on Optimization of Micro-WireElectric Discharge Machining Parameters”, Proceedings of 3rdInternational and 24th All India Manufacturing Technology, Design and Research Conference (AIMTDR), Visakhapatnam, India, December 2010,pp.349-354.
  74. DineshS., Mukesh M and Jose Mathew, 2010, “Study of Tool Wear and Surface Roughness in Micro End Milling”, Proceedings of 3rd International and24th All India Manufacturing Technology, Design and Research Conference(AIMTDR), Visakhapatnam, India, December 2010, pp.401-404.
  75. Mukesh M., Dinesh S., Viran V., Manu R. and Jose Mathew., 2010, “Experimental Studies on Cutting Forces and Surface Roughness in MicroTurning”, Proceedings of 3rd International and 24th All India ManufacturingTechnology, Design and Research Conference (AIMTDR), Visakhapatnam, India, December 2010, pp.365-370.
  76. Robin, C. J. and Jose Mathew, 2010, “Modeling of Micro-EDM using Molecular Dynamics and Finite Element Method”, Proceedings of 3rd International and 24th All India Manufacturing Technology, Design and Research Conference(AIMTDR), Visakhapatnam, India, December 2010, pp.143-148.
  77. Robin, C. J. and Jose Mathew, 2010, “An Investigation into the Fabrication of various Micro-components”, Proceedings of 3rd International and 24th AllIndia Manufacturing Technology, Design and Research Conference (AIMTDR), Visakhapatnam, India, December 2010, pp.167-172.
  78. SivaPrasad Arikatla., Allesu, K and Jose Mathew, 2010, “Modeling of Electric Discharge Machining response variable using Design of Experiments”, Proceedings of 3rd International and 24th All India Manufacturing Technology, Design and Research Conference (AIMTDR), Visakhapatnam, India, December 2010,pp.7-14.

  79. C.J. Robin and Jose Mathew, “Molecular Dynamic Simulation ofMicro End Milling,” Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN) Dec. 2009, pp. B6-B10.
  80. V.S. Sooraj, M. Rahman and Jose Mathew, “Prediction and Optimization of Surface Roughness in Micro Turning using Response Surface Methodology and Genetic Algorithm,” Proceedings of International Conference onPrecision, Meso, Micro and Nano Engineering (COPEN) Dec. 2009, pp .B11- B17.
  81. D.Aravind, A. Varun, R. Manu and Jose Mathew, “Modeling of Micro EDM Process for MRR Using ANN,” Proceedings of International Conference onPrecision, Meso, Micro and Nano Engineering (COPEN) Dec. 2009, pp.C16-C19.
  82. C.J. Robin and Jose Mathew, “Molecular Dynamic Simulation of Micro wire electric discharge machining,” Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN) Dec. 2009, pp. C20-C24.
  83. K.P.Somashekar, C. J. Robin, N. Ramachanran and Jose Mathew,“Neural Network Approach for the Estimation of MRR and Overcut in m-WEDM”, Proceedings of International Conference on Precision, Meso, Micro and NanoEngineering (COPEN) Dec. 2009, pp. C25-C30.
  84. K.P.Somashekar, N. Ramachanran and Jose Mathew, “Optimization of m-WEDM parameters using Grey Relation Analysis,” Proceedings of InternationalConference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2009, pp. C31-C36.
  85. SivaPrasad Arikatla, K. Allesu, and Jose Mathew, “Experimental Studies on the Effect of EDM Parameters on the Surface Integrity of High Speed Steel”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2009, pp.G28-34.
  86. K.Jayakumar, Jose Mathew, M.A. Joseph, Rajesh Kumar and K. UmaSankaraRao, “Experimental Investigation on Mechanical and Wear Properties ofA356-SiCp Metal Matrix Composites”, Proceedings of International Conference onPrecision, Meso, Micro and Nano Engineering (COPEN). Dec.2009, pp. H14-H20.
  87. K.Jayakumar, Jose Mathew, M.A. Joseph, “Prediction and OptimalParameter Selection for Surface Roughness and Cutting Forces in CNC End Milling of AL/SiCp MMC”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2009, pp. J7-J11.
  88. Sooraj V. S., Jose Mathew, “Metal Cutting Characteristics in MicroScale Turning Operation”, Proceedings of 2nd International and 23rd All IndiaManufacturing Technology, Design and Research Conference (AIMTDR), Chennai, India, December 2008, pp. 585- 589.
  89. SomashekarK.P., SubbaRaoNuvvula, Jose Mathew, “Effect of DischargeConditions on the Performance of Micro Electrical Discharge Machining”, Proceedings of 2nd International and 23rd All India Manufacturing Technology, Design and Research Conference (AIMTDR), Chennai, India, December 2008, pp.615-620.
  90. SomashekarK. P. Jose Mathew, “Fabrication of Microelectrodes for Micro EDM Operation Using Micro EDG”, Proceedings of 2nd International and 23rd AllIndia Manufacturing Technology, Design and Research Conference (AIMTDR), Chennai, India, December 2008, pp. 639- 644
  91. BhavaniPrasad Lanka, Jose Mathew, “Modelling and Analysis of CuttingForces in End Milling”, Proceedings of 2nd International and 23rd All IndiaManufacturing Technology, Design and Research Conference (AIMTDR), Chennai, India, December 2008, pp. 91-96.
  92. Indira Priyadarshini R., Kavitha A., Rajendra Kumar P. K., Jose Mathew, “Computer Aided Design and Manufacturing of a Miniaturized Gear Pump”, Proceedings of 2nd International and 23rd All India Manufacturing Technology, Design and Research Conference (AIMTDR), Chennai, India, December 2008, pp.215-220.
  93. Jose Mathew, Afsal A.M., Tiju Joy, Sooraj V.S., “Computer Aided and Manufacture of a Miniature Gear Pump”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering (COPEN), Dec. 2007, pp. 75-80.
  94. Jose Mathew, Sooraj V.S., J. Hariprasad, “Micro turning; the Art ofMiniaturized Manufacturing”,  Proceedings of International Conference onPrecision, Meso, Micro and Nano Engineering (COPEN), Dec. 2007, pp. 181-188.
  95. Jose Mathew, Hashim V., Sooraj V. S., M. Rahman, “Experimental Analysis ofMicro ole Making in Die Steel using Micro Electric Discharge Machining”, Proceedings of International Conference on Precision, Meso, Micro and NanoEngineering (COPEN), Dec. 2007, pp. 279-285.
  96. Jose Mathew, V.B. Suresh Kumar, Somashekar K.P., “Investigation into the Influence of Process Parameters on Micro Wire EDM”, Proceedings of International Conference on Precision, Meso, Micro and Nano Engineering(COPEN), Dec. 2007, pp. 287-293.
  97. Jose Mathew, G.L. Goswami, N, Ramakrishnan, N.K. Naik, “Parametric Studies on Pulsed Nd:YAG Laser Cutting of Carbon Fibre Reinforced Composites”,4thAsia Pacific Conference on Materials Processing, Singapore, May 1999.
  98. N.Saresh, M. GopalakrishnaPillai, Jose Mathew, “Investigations into the effects of electron beam welding on thick Ti-6Al-4V TitaniumAlloy”,  7th Asia PacificConference on Materials Processing, Singapore, Dec.2006.